Everyone knows that the kitchen is a place that produces oil smoke all year round. Kitchen tiles will inevitably leave thick grease after being used for a long time, which is very difficult to clean. So some people want to renovate the kitchen tiles, so when renovating What should we pay attention to? So, let’s follow Zhongtaojun to learn about the steps to renovate kitchen tiles!
1. 3 ways to renovate ceramic tiles
1. Partial repair, only need to replace the problematic tiles
2. Replace all, remove all tiles before laying them
3. Covering, there is no need to remove the original tiles or replace them partially, but to continue laying them on the original basis
2. Construction steps for kitchen tile renovation
1. Check the flatness
Although the original ceramic tile surface already has a certain degree of flatness, it cannot be ruled out that there are other causes of unevenness. Therefore, before construction, it is necessary to use a tool to measure the flatness of the wall to check.
2. Check the empty drum
Before laying ceramic tiles, inspection of hollow drums is an essential task. Use a hollow hammer to gently tap the center and four sides of each wall brick. If there is a soft and crisp sound, it means that there is a hollow in this area.
3. Remove the hollow bricks and smooth the base surface
After the tiles are removed, clean the removed area, mix the cement mortar, and fill the removed parts to keep them smooth with the surrounding tiles.
4. Apply interface agent
Applying an interface agent can effectively improve the adhesion of the smooth base surface and enhance the adhesion between the tiles and the tile surface. Therefore, after the tile base surface is completed, it is necessary to paint the interface on the tile base surface. agent.
5. Stir the tile adhesive and scrape the tile adhesive
Don’t mix ceramic tile glue like cement and yellow sand.There is a shovel on the ground for stirring, otherwise uneven mixing will occur. The evenly stirred tile adhesive is evenly scraped on the base surface with a toothed scraper, and the tile adhesive forms a rack-like structure.
6. Laying ceramic tiles
During paving, gaps need to be left between tiles, so prepare certain clips between the tiles to prevent the gap from being uneven, resulting in uneven tiles.
7. Clean the ceramic tile surface
After the tiles are laid, it is necessary to clean the adhesive on the surface of the tiles in time to prevent the adhesive from being unable to be cleaned after it dries.
So you see, not only is it very particular when laying ceramic tiles, but also the steps of renovating the ceramic tiles are also very particular, so you will know that decorating a house is not a simple matter! The above content is what Zhongtaojun has shared with you about the Steps for renovating kitchen tiles. I hope it will be helpful to you! Get away!
(The above pictures are all from the Internet, any infringement will be deleted)
